Summary

XD1 type current limiting reactor is a dry type reactor made of unsaturated polyester resin casting. Use capacitors to limit instantaneous surge current.

Compliant with standards

GB/T 1094.6-2011, GB/T 19212.1-2016

Model definition

Technical Parameter

Normal working and installation conditions

Installation site: indoor

Ambient temperature: -25 ℃~+50 ℃

Relative humidity: ≤ 50% at 40 ℃: ≤ 90% at 20 ℃

Altitude: ≤ 1000m

Environment condition: No harmful gases and vapors, no conductive or explosive dust, no severe mechanical vibrations

Note: Each three-phase capacitor should be equipped with one reactor per phase. When installing three-phase in parallel, attention should be paid to the incoming and outgoing directions of the reactor wiring. The inter phase wiring must be opposite to the wiring of the two sides. If the first end X1 of the two sides is the incoming line, then the end X2 of the middle phase is the incoming line. The center distance between reactors shall not be less than 42mm.