- About
- Product
-
News
MENU
-
About
-
Product
-
News
-
Honor
-
Hr
ASMJ Series Self-healing AC Filtering Capacitors
Product Classification：Self-healing Power Capacitors
Company Brands：Yadulan Electric
Product Introduction：The ASMJ series self-healing AC filtering capacitors are mainly used in power frequency AC power systems to form filtering circuits with other components, filter out fundamental or multiple harmonic currents in the system, and can also be used as reactive power compensation to improve power factor.
Summary
The ASMJ series self-healing AC filtering capacitors are mainly used in power frequency AC power systems to form filtering circuits with other components, filter out fundamental or multiple harmonic currents in the system, and can also be used as reactive power compensation to improve power factor.
This product uses metalized polypropylene film with excellent self-healing performance as the solid medium and is produced using international production processes. The product has high reliability, small volume, low loss, and excellent electrical performance.
Product execution standards: GB/T12747-2017.1, GB/T12747-2017.2.
Main technical parameters
☆ Loss angle tangent value: below 0.0010 at rated power frequency voltage;
☆ Capacitance deviation: The difference between the measured value and the rated value of the capacitor shall not exceed 0~+3%, and the ratio of the maximum and minimum capacitance values measured between any two line terminals in a three-phase capacitor shall not exceed 1.02;
☆ Withstand voltage: between poles: power frequency 2.15Un, 2S; Pole to shell: Apply a voltage of 3.6kv/5S to products with a rated voltage of 600V or below; Applied voltage of 7.2kv/5S to products with a rated voltage of 600V or above;
☆ Maximum allowable overvoltage: 1.15Un, not exceeding 8 hours every 24 hours;
☆ Maximum allowable overcurrent: 1.5In;
☆ Self discharge characteristics: The capacitor is equipped with a discharge device, which can reduce the remaining voltage of the capacitor from √ 2Un to 75V or below within 3 minutes of disconnecting the power supply;
Precautions
☆ Transport & Preservation
Capacitors should be transported in the original factory packaging as far as possible, and should be handled with care and care;
Capacitors should be kept in a dry and non-corrosive gas room;
☆ Install and run the following use
THE CAPACITOR IS INSTALLED INDOORS, AT AN ALTITUDE OF 2000M;
The ambient air temperature is -25~+50°C, and the humidity is less than 85%;
Note: Products can be customized for users to use in low temperature environment -40~+50°C.
The installation plant should not be exposed to direct sunlight, not wet by rain, avoid excessive dust and violent vibration, and the distance between them should be greater than
30mm;When the ambient temperature is high in summer, effective measures should be taken to ensure good ventilation and heat dissipation;
Ordering instructions
☆ The user must provide the rated voltage, rated capacitance, phase number and other parameters of the product.
☆ The user must try to provide some characteristics of the place of use.
☆ Main product model specifications and data table (see attached table)
Concentrate:
1. The installation size of single-phase products is the same as that of three-phase products of the same specification;
2. The company can customize other specifications for users, if there are special requirements, please negotiate the order.
Model and specification BSMJ
Rated voltage (kV)
Rated capacity (kvar)
Rated frequency (Hz)
Rated capacitance（ μ F)
Rated current (A)
Shell height (mm)
Outline drawing number
0.45-5-3
0.45
5
50
78.6
6.5
H130
Figure 1
0.45-10-3
0.45
10
50
157.2
13.0
H210
Figure 1
0.45-15-3
0.45
15
50
235.8
19.5
H210
Figure 2
0.45-20-3
0.45
20
50
314.4
26.0
H260
Figure 2
0.45-25-3
0.45
25
50
393
32.5
H260
Figure 2
0.45-30-3
0.45
30
50
417.6
39.0
H310
Figure 2
0.45-40-3
0.45
40
50
628.8
52.0
H260
Figure 3
0.45-45-3
0.45
45
50
707.4
58.5
H260
Figure 3
0.525-5-3
0.525
5
50
57.8
5.5
H130
Figure 1
0.525-10-3
0.525
10
50
115.5
11.0
H210
Figure 1
0.525-15-3
0.525
15
50
173.2
16.5
H210
Figure 2
0.525-20-3
0.525
20
50
231
22.0
H260
Figure 2
0.525-25-3
0.525
25
50
288.8
27.5
H260
Figure 2
0.525-30-3
0.525
30
50
346.5
33.0
H310
Figure 2
Model and specification BSMJ
Rated voltage (kV)
Rated capacity (kvar)
Rated frequency (Hz)
Rated capacitance（ μ F)
Rated current (A)
Shell height (mm)
Outline drawing number
0.525-40-3
0.525
40
50
462.0
44.0
H260
Figure 3
0.525-45-3
0.525
45
50
519.7
49.5
H260
Figure 3
0.75-5-3
0.75
5
50
28.3
3.9
H130
Figure 1
0.75-10-3
0.75
10
50
56.6
7.8
H210
Figure 1
0.75-15-3
0.75
15
50
84.9
11.7
H210
Figure 2
0.75-20-3
0.75
20
50
113.2
15.6
H260
Figure 2
0.75-25-3
0.75
25
50
141.5
19.5
H260
Figure 2
0.75-30-3
0.75
30
50
169.8
23.1
H310
Figure 2
0.75-40-3
0.75
40
50
226.4
30.8
H230
Figure 3
0.75-45-3
0.75
45
50
254.7
34.7
H260
Figure 3
View Larger Map 
